News

Meypack new palletiser innovations, PackPal PP 200

 

Meypack PackPal PP200R

The Meypack pp 200 layer Palletiser is an extremely compact machine that is often used when the space available is insufficient to accommodate a classic palletiser. However, its compact size is not all that it has. The PackPal PP 200 from Meypack is equipped with a double pre-grouping station. This enables highly flexible and gentle creation of layers.

pp200r2

Meypack PP200R palletiser

 

With the introduction of this new palletising machine available in two output categories,
Meypack has expanded its machine programme to include a new highly efficient and flexible solution. Despite its compact design the PackPal is capable of processing all of the common pallet formats. Furthermore, it is possible to easily integrate intermediate layer or cover sheet dispensers.

What’s special about the PP 200 are its two gripper arms, each of which is comprised of a triple axle servo-controlled positioning unit and can place the products in any position desired. Both gripper arms can be positioned either next to each other or also one behind the other. In contrast to the PP 100, which only has one gripper arm, the intermediate table can be filled from both the left and right sides. Each gripper arm fills one half of the layer.

By using the PP 200’s double pre-grouping station, both gripper arms can easily pick up the incoming packs and process them much more quickly. For this reason, an output of up
to 60 packs per minute can be achieved with this machine. When multipacks are to be palletised, the output can be cranked up significantly by processing a number of packs simultaneously – depending upon the layer profile.

Through the interaction of the intelligent gentle layer building and the telescopic lifting table, a palletising output of up to six layers can be achieved in the case of single lane infeed at an infeed level of + 1000 mm.
The PackPal can be used as an independent palletising machine or in combination with a packaging machine from the VP, SW and FW Series.

Season’s greetings from Penn Packaging

 

To all customers, colleagues, associates and friends we would like to wish you a very Merry Christmas and a happy and prosperous 2015.

540

 

Meypack high tech palletising solutions

 

At the end of 2009, Meypack introduced the new PackPal PP 200 with two gripper arms as well as the single armed PP 100 onto the market. With the introduction of this new palletising machine available in two output categories, Meypack has expanded its machine programme to include a new highly efficient and flexible solution. Despite its compact design the PackPal is capable of processing all of the common pallet formats.

Furthermore, it is possible to easily integrate intermediate layer or cover sheet dispensers.

Through the control software, the arms can work independently from one another and can pick up products from the infeed and place them on the intermediate table.

meypack_pp200r

Meypack PP200R

By using the PP 200’s double pre-grouping station, both gripper arms can easily pick up the incoming packs and process them much more quickly. For this reason, an output of up to 60 packs per minute can be achieved with this machine. When multipacks are to be palletised, the output can be cranked up significantly by processing a number of packs simultaneously – depending upon the layer profile.

meypack_pp200r

Meypack PP200r

Not only through the use of Meypack’s telescopic lifting table but also by holding the pre-fabricated layer on the intermediate table, it is possible to achieve continuous motion of the machine, even during the automatic pallet changes. Equipped with a telescopic device, the lifting table can move up and down, forwards and backwards. In the rear position, its length can be reduced by up to one half so that the loaded pallet is freestanding. It is thereby possible to already pick up the next layer created by the double pre-grouping station while simultaneously, a full pallet is being automatically transported to the pallet wrapper and an empty pallet is moving forward from the empty pallet magazine.

Through the interaction of the intelligent gentle layer building and the telescopic lifting table, a palletising output of up to six layers can be achieved in the case of single lane infeed at an infeed level of + 1000 mm.

For more information please contact us on 01473 893990 or [email protected]

SN UltraClean pouch technology

 

Besides precise filling and high speed the sterility and storage life are the major challenges when filling fresh, liquid dairy products into pouches. By integrating the ULTRA-CLEAN technology into the multi-station machines LMS 120 LP and LMS 124 LP SN tackles this challenge with German efficiency.

SN LMS120 UltraClean pouch filler

SN LMS120 UltraClean pouch filler

An automatic hydrogen-peroxide sterilization is integrated in the pouch making process which ensures sterility of the film and spouts. In combination with clean-room technology and a secured coldchain the filling goods last 40-60 days.

Furthermore, a camera system monitors the exact positioning of the spouts with a precision of 0,1 mm which makes further costly and personnel-intensive quality controls redundant.

Newly developed cutting tools allow for a smooth pouch without ridges reducing the risk of injury for the customer (children) to a minimum. At the same time damages during transport and storage caused by a pouch are eliminated.

All standard pouch formats and contents between 70 ml and 350 ml can be produced on the LMS 120 LP and LMS 124 LP machines. Both machines are CIP and SIP compatible. All machine parts, including the filling area, can be cleaned and sterilized without dismantling. The SN ULTRA-CLEAN technology meets all international requirements for clean filling of fresh, liquid dairy products into pouches and is acknowledged and certified by FDA, USDA and 3A Dairy. Format change overs are easily and quickly done by exchanging complete building groups and by using central adjustments.

For more information call us on 01473 893990 or [email protected]